Electronic Grd CuNi C71580 Round 0.3750 " (+-.005)
ASTM B 151/B 151M|2020|ASTM F 96|1977|EIA-ECA-950|ROHS COMPLIANT
Value Added Services
The following are the value added services for this product.
The process of cutting holes in large diameter long bar that doesn't leave any solid drops, only chips, from the inside of the bar.
The process of removing burrs and sharp corners from cut piece pieces, often done by hand or a vibratory tumbler, depending on the size of the product and the number of pieces.
The process of grinding the end of bars to remove edge burrs and improve performance in automatically fed turning machines.
The process of grinding using the outside diameter (OD) of round bars for improved tolerance, straightness, and surface quality.
The process of drilling holes into material of various sizes and lengths to meet customers specifications.
An electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.
The process of applying heat to metal in order to alter mechanical or physical properties to meet customer specifications.
The process of bending material of various sizes and lengths to meet customers specifications.
The process of using machines to form material of various sizes and lengths to customer specifications.
The process of smoothing or refining the surface of a material.
The process of adding an outer coating to metal to inhibit corrosion and/or enhance appearance.
The process of cutting material to meet tight tolerances of customer specifications.
The process of rolling metal to reduce and unify the thickness of material into a variety of shapes to meet customer specifications, including rings or ring segments.
The process of boring out the internal diameter (ID) of large diameter round bar, leaving a usable core intact.
Additional material tests can be conducted to help customers meet their requirements.
The process of using high speed bar sawing to meet tight tolerance customer specifications.
The process of deburring/polishing small parts in bulk using abrasives and rotation/vibrating motion in a barrel.
The process of joining materials by using high heat to melt the parts together and allowing them to cool, causing fusion.
If you would like to request for any of the value added services, please utilize this special request form to initiate the discussion with our sales team